CYLINDER TESTING AND SERVICING 2008

We offer equipment servicing for most makes and models. All equipment is well looked after during servicing and properly stored and cared for. Labour and test costs must be paid for when equipment is booked in. Cost of parts is payable upon completion of service.
Recent changes in the rules and regulations regarding the inspection of diving tanks require the testing station to destroy any tanks that fail the test. Inspection, testing is carried out in accordance with EN1968 for steel cylinders and EN1808 for aluminium cylinders. We carry out a range of scuba maintenance tasks including regulator servicing and cylinder testing in accordance with current European Union regulations and Industry standards for scuba equipment.
In addition, if a cylinder requires internal shot blasting procedures in order to remove corrosion or pitting, this will be carried out likewise, if on examination the valve requires a service, this will also be done. 
When you bring your cylinders in for a Hydro test, you will be asked to sign a declaration that states that you agree to these terms and conditions.  You will also be required to pay the cylinder test failure destruction charge of €25, which will then be deducted from the final bill when the cylinder passes the test.

Hydrostatic Cylinder Test, Thread and Valve Check

€46.00

Hydrostatic Aluminium Cylinder Test, Thread & Valve Check, NDT-Visual Plus Crack Detection

€52.00

Visual Cylinder Test Steel Tanks

€17.00

Visual Cylinder Test Aluminium Tanks inc Visual Plus Crack Test

€30.00

Internal Shot Blast – Clean & Wash

€20.00

External Shot Blast and Zinc Spray

€35.00

External Paint (one colour)

€25.50

External Paint (additional colours)

€12.00

External Metallic Paint (one colour)

€31.00

External Metallic Paint (additional colours)

€15.50

NDT (Aluminium cylinders only)

€17.00

Cylinder and Valve O2 Clean

€43.00

Cylinder Valve Service (Complete Service. Inc Parts Price May Vary According to the Valve)

€29.00

Cylinder Valve Removal

€4.00

AIR AND COMPRESSOR SERVICING

At Easy Divers we believe in clean tanks and compressors. We use the F3000 Safe Air tester which enables monthly or quarterly breathing-air tests to be conducted easily and quickly. This ensures complete compliance with the relevant requirements of COSHH L5.
The detection parameters of BS 4275 1997 are met or exceeded during the automatically controlled test by the use of Factair-approved detector tubes to establish levels of carbon monoxide, carbon dioxide, oil and water. An inbuilt electronic sensors with digital readouts measures oxygen content, whilst an inbuilt flow meter allows airflow up to 600 l/min to be verified. Additionally we test for both mineral and synthetic oils.

Ask us about Your Air Analysis or a Compressor Service or Check Up

REGULATOR SERVICING

1st and 2nd Stage (Please book in advanced to order your manufactures service kits)

€77.00 plus parts

Octopus Service (Please book in advanced to order your manufactures service kits)

€27.50 parts extra

Gauge Check (Free with service)

€9.00

Depth Gauge Check (including O-ring replacement)

€9.00

BCD SERVICING

BCD Service

€25.50 parts extra

Emergency Cylinder Hydrostatic Test

€27.50

Emergency Cylinder Visual Test

€22.50

SUIT REPAIRS

Cuff Seal (neoprene)

€51.00 per pair

Cuff Seal (latex)

€45.00 per pair

Cuff Seal (HD latex)

€51.00 per pair

Neck Seal (neoprene)

€77.00

Neck Seal (latex)

€70.00

Leak Test

€38.00

Patches

Price on Completion

COMPUTER BATTERY CHANGES

Price of computer changes varies depending on type.  Note that we need to send some computers back to the manufacturer and this will incur an additional carriage charge. All Dive Computers are pressure checked after all battery changes.

€17.00 -  €120.00

Dive Computers: Suunto, Mares, Citizen

From €43.00